GE Fanuc Embedded Systems’ VMIVME-7807/VME-7807RC are full featured Pentium® M-based, single board computers (SBCs) in a single-slot, passively cooled, VME Eurocard form factor. These products utilize the advanced technology of Intel®’s 855GME chipset.

　　The VMIVME-7807/VME-7807RC provide features typically found on desktop systems such as:

　　• 1.0GB DDR SDRAM using one SODIMM and an optional 512MB of solder-in memory for a maximum of 1.5GB

　　• Built-in SVGA support (front panel connection)

　　• Digital video controller (rear I/O) DVI-D with dual head display capabilities

　　• 10/100 Mbit Ethernet controller (front panel connection)

　　• Dual Gigabit Ethernet supporting (front panel or rear I/O)

　　• Optional P0 with VITA 31.1 interface

　　• Serial ATA (SATA) support (rear I/O)

　　• Serial port COM1 (front panel connection)

　　• Ultra IDE drive support (rear I/O)

　　• Real-Time clock/calendar

　　• Front panel reset switch

　　• Miniature speaker

　　• Keyboard/Mouse port (front panel connection)

　　The 855GME chipset allows the VMIVME-7807/VME-7807RC to provide enhanced features such as integrated video and Ultra ATA/100 IDE support. The VMIVME-7807/VME-7807RC are capable of executing many of today’s desktop operating systems such as Microsoft®’s Windows® XP, Windows 2000 and a wide variety of Linux® based operating systems. The standard desktop features of the VMIVME-7807/VME-7807RC are described in Chapter 2 of this manual.

　　The VMIVME-7807/VME-7807RC provide features useful to embedded applications such as:

　　• Three serial ports: COM2, COM3 and COM4 (rear I/O)

　　• Four USB 2.0 ports (two on front panel and two rear I/O)

　　• 32KB of nonvolatile RAM

　　• Remote Ethernet booting

　　• Up to 2GB of CompactFlash on secondary IDE (optional)

　　• Software-selectable Watchdog Timer with reset

　　Additionally, the VMIVME-7807/VME-7807RC offer one PMC expansion site (PCI-X, 66MHz) with front panel access. The VMIVME-7807/VME-7807RC are capable of executing many of today’s operating systems such as VxWorks®, Solaris™ or QNX®. The embedded features of the VMIVME-7807/VME-7807RC are described in Chapter 3 of this manual.

　　The VMIVME-7807/VME-7807RC are suitable for use in applications ranging from telecommunications, simulation, instrumentation, industrial control, process control and monitoring, factory automation, automated test systems, data acquisition systems and anywhere that the highest performance processing power in a single VME slot is desired.

　　Intel 855GME Chipset

　　The VMIVME-7807/VME-7807RC incorporate the latest Intel chipset technology, the 855GME. This chipset utilizes Advanced Hub Architecture (AHA). The AHA allows for increased system performance by separating many high-bandwidth I/O accesses from PCI accesses, relieving bottlenecks on the PCI bus. Furthermore, the 855GME chipset brings new levels of integration to motherboard chipsets and provides additional features such as Integrated LVDS and Serial ATA.

　　Organization of the Manual

　　This manual is composed of the following chapters and appendices:

　　Chapter 1 - Installation and Setup describes unpacking, inspection, hardware jumper settings, connector definitions, installation, system setup and operation of the VMIVME-7807/VME-7807RC .

　　Chapter 2 - Standard Features describes the unit design in terms of the standard PC memory and I/O maps, along with the standard interrupt architecture.

　　Chapter 3 - Embedded PC/RTOS Features describes the unit features that are beyond standard functions.

　　Maintenance provides information relative to the care and maintenance of the unit.

　　Compliance provides applicable information regarding regulatory compliance.

　　Appendix A - Connector Pinouts illustrates and defines the connectors included in the unit’s I/O ports

　　Appendix B - AMI BIOS Setup Utility describes the menus and options associated with the AMI (system) BIOS.

　　Appendix C - Argon BIOS describes the menus and options associated with the LAN Boot BIOS.

　　Appendix D - System Driver Software describes the steps required to load system drivers.

　　Installation

　　The VMIVME-7807/VME-7807RC conform to the VME physical specification for a 6U board. The VMIVME-7807/VME-7807RC can be used for system control or as a peripheral board. They can be plugged directly into any standard chassis accepting either type of board.

　　The following steps describe the GE Fanuc Embedded Systems-recommended method for installation and powerup of the VMIVME-7807/VME-7807RC :

　　1. If a PMC module is to be used, connect it to the VMIVME-7807/VME-7807RC prior to board installation (as shown in Figure 1-2 on page 29). Refer to the Product Manual for the PMC module for configuration and setup.

　　2. Insert the VMIVME-7807/VME-7807RC into a VME chassis system controller or peripheral slot. While ensuring that the board is properly aligned and oriented in the supporting board guides, slide the board smoothly forward against the mating connectors. Use the ejector handles to firmly seat the board.

　　3. All needed peripherals can be accessed from the front panel or the rear I/O VMIACC-0586/ACC-0586RC or VMIACC-0590/ACC-0590RC Rear Transition Modules (RTMs). Each connector is clearly labeled on the front panel and detailed pinouts are in Appendix A.

　　4. Connect a keyboard and mouse if the system has not been previously configured.

　　5. The VMIVME-7807/VME-7807RC feature an optional CompactFlash Disk resident on the board. Refer to Chapter 3 for set up details.

　　6. If an external drive module is installed, the BIOS Setup program must be used to configure the drive types. See Appendix B to properly configure the system.

　　7. If a drive module is present, install the operating system according to the manufacturer’s instructions.

　　BIOS Setup

　　The VMIVME-7807/VME-7807RC have an onboard BIOS Setup program that controls many configuration options. These options are saved in a special non-volatile, battery-backed memory chip and are collectively referred to as the board’s ‘CMOS Configuration’. The CMOS configuration controls many details concerning the behavior of the hardware from the moment power is applied.

　　Details of the VMIVME-7807/VME-7807RC BIOS setup program are included in Appendix B.

　　Front/Rear Panel Connectors

　　The VMIVME-7807/VME-7807RC provide front panel access for the PMC expansion site, an optional Gigabit Ethernet port, one 10/100 RJ45 connector, one serial port, SVGA, keyboard/mouse, the manual reset switch and the status LEDs. A drawing of the VMIVME-7807/VME-7807RC front panels are shown in Figure 1-5. The front panel connectors and indicators are labeled as follows:

　　• 10/100： 10/100 Mbit Ethernet connector

　　• G1： 10/100/1000 Mbit Ethernet connector 1 (or LEDs) port 1

　　• G2 ：10/100/1000 Mbit Ethernet LEDs port 2

　　• M/K ：Mouse/keyboard connector

　　• COM1： Serial Port

　　• RST ：Manual reset switch

　　• S ：Status LEDs

　　• SVGA ：Analog Video connector

　　The VMIVME-7807/VME-7807RC provide rear I/O support for the following: digital video, Serial ATA, COM2, 3 and 4, IDE drive and two USB ports. These signals are accessed by the use of an RTM such as the VMIACC-0586/ACC-0586RC and the VMIACC-0590/ACC-0590RC, which terminates into industry standard connectors.

　　The front panel connectors, including connector pinouts and orientation, for the VMIVME-7807/VME-7807RC are defined in Appendix A. Rear panel connections are defined in the appropiate RTM Installation Guide. Contact Sales for compatible RTMs offered by GE Fanuc Embedded Systems.

　　Introduction

　　The VMIVME-7807/VME-7807RC are Pentium M processor-based single board computers compatible with modern industry standard desktop systems. The VMIVME-7807/VME-7807RC therefore retain industry standard memory and I/O maps along with a standard interrupt architecture. The integrated peripherals described in this section (such as serial ports, USB ports, IDE drives, floppy drives, video controller and Ethernet controller) are all memory mapped the same as similarly equipped desktop systems, ensuring compatibility with modern operating systems.

　　The following sections describe the standard features of the VMIVME-7807/VME-7807RC.

　　CPU

　　The VMIVME-7807/VME-7807RC CPUs are factory populated with Pentium M processors. The CPU speed and Memory/CompactFlash size are user specified as part of the VMIVME-7807/VME-7807RC ordering information.

　　Physical Memory

　　The VMIVME-7807/VME-7807RC provide DDR Synchronous DRAM (SDRAM) as onboard system memory. Memory can be accessed as bytes, words or longwords.

　　The VMIVME-7807/VME-7807RC accept one 200-pin DDR SDRAM SODIMM along with the optional solder-in 512MB onboard memory, for a maximum capacity of 1.5GB. The onboard DRAM is accessible to the VME through the PCI-to-PCI bridge and is addressable by the local processor.

VME-7807RC.pdf
Recommended related products:

S-093N 3BHB009885R0001
UMP3009 TRICONEX
TRICONEX TCM 4355X
TRICONEX TCM4355X
MP 3009 TRICONEX
3009 TRICONEX
51454926-176 FC-SCNT01
51454926-176 FC-SCNT02
GE 151X1235DB15NP03
GE 151X1235DB10SA01
GE 151X1235DB15SA03
GE 151X1207DC13SA21
GE 151X1235DB15SA01
151X1235BC01SA01 GE
GE 151X1233DB01SA01R3
GE 151X1233DB01SA01R4
GE 151X1233DB01SA01R
GE 151X1235DB15SA02
GE 151X1235DB15SA01
GE 151X1235DB15SA01
S-093N 3BHB009885R0021
ABB 3BHB009885R0001
More......