Product Application Label

Product Brand Tag

Description
Reviews

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to accurately return the information to you. We apologize for the inconvenience. Of course, we will respond to your inquiries as soon as possible.

　　Other names for 5SHY35L4520:

　　5SHY35L4520 Semiconductor Module

　　High Voltage Inverter Module 5SHY35L4520

　　5SHY35L4520 IGCT Module

　　I. Core Functions

　　High-Power Controllable Power Switch: As the core power device of medium and high voltage converters, it controls the conduction and cutoff of the main circuit current, realizing AC-DC power conversion.

　　Snubber-less Turn-off Capability: Eliminates the need for complex turn-off buffer absorption circuits, simplifying the hardware of high-voltage high-power converters.

　　Low Conduction Loss: Low on-state voltage drop under high current, suitable for continuous high-current operation. Extreme Surge Current Withstand: Withstands up to 120kA surge current in 10ms, short-circuit withstands approximately 10μs, and exhibits strong resistance to fault impacts.

　　Fiber Optic Control Drive: The gate unit is integrated into the device body; the fiber optic cable receives the control signal, providing strong isolation between high and low voltage circuits and strong resistance to electromagnetic interference.

　　II. Working Principle:

　　IGCT = GCT thyristor chip + integrated gate commutation drive unit. The 5SHY35L4520 is an asymmetric chip structure.

　　1. Conduction Process: The fiber optic cable sends an on-state command to the gate unit, and the gate outputs a positive trigger pulse. The chip's PNPN four-layer thyristor structure triggers positive feedback, causing the device to quickly turn on. The main current flows through the anode-cathode, resulting in a very low on-state voltage drop, similar to a typical high-power thyristor.

　　2. Fiber Optic Control Drive: 2. Turn-off Process (IGCT Core Commutation Mechanism): Upon receiving a turn-off fiber command, the integrated gate unit forcibly commutates almost all of the anode main current to the gate circuit within microseconds (current commutation, completed in approximately 1μs), directly cutting off carrier injection at the cathode, forcibly switching the thyristor mode to PNP transistor mode, completely turning off the main current, achieving hard turn-off, and eliminating the need for the bulky buffer circuit of a GTO thyristor.

　　3. Asymmetric Structure Characteristics: The chip is only optimized for forward blocking up to 4500V; it can only withstand very low voltages in the reverse direction, and there is no internal freewheeling diode. For topologies requiring reverse freewheeling, an independent fast recovery diode must be connected in parallel externally.

　　III. Key Points for Engineering Use

　　This IGCT typically operates at a maximum frequency of 500-800Hz, making it unsuitable for high frequencies; although current commutation is fast, the carrier storage time (t_q) is long, limiting the maximum switching frequency.

　　A minimum on-time of 40μs is a hard constraint; the control software cannot output turn-on pulses narrower than 40μs, otherwise the device will fail to lock in and malfunction.

　　The switching time varies with junction temperature, operating voltage, and turn-off current: the higher the current and junction temperature, the greater the t_{doff} and t_q.

　　The original driver board must be used; replacing it with another driver will completely change the switching delay and commutation timing, directly burning out the device.

　　IV. Typical Application Scenarios

　　The ABB ACS6000 three-level NPC medium-voltage high-power frequency converter is the most mainstream original component, used for high-power motor drives: rolling mills, large fans, large water pumps, mining crushers, with power ranging from MW to tens of MW. It is a three-level inverter bridge arm with an external fast recovery diode for freewheeling.

　　Static Synchronous Compensator (STATCOM), SVC Flexible Reactive Power Compensation Device: Dynamic reactive power compensation for power grids, voltage source converter, large-capacity power quality management.

　　Medium and High Voltage DC Transmission, Flexible DC Converter Valve Power Unit: High-power power conversion, DC-AC bidirectional conversion.

　　High-Power Energy Storage Converter (PCS): Power conversion for megawatt-level and above energy storage systems.

　　Industrial Special Power Supplies: Electric arc furnace power supplies, large electrolysis power supplies.

　　V. Usage Precautions

　　Must be installed with double-sided water cooling and crimping. Crimping force must strictly adhere to the manual; improper crimping can easily burn out components.

　　Cannot withstand reverse high voltage; the topology must be designed with external fast recovery diodes.

　　Gate unit relies on fiber optic control; fiber optic aging and contamination will cause turn-on/turn-off failures.

　　Short-circuit withstand time is very short; system protection must respond at the microsecond level.

1.Do you offer global shipping?

Yes. We have local distribution centers on every continent, enabling us to quickly ship parts to anywhere in the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple and convenient as possible, we offer a variety of payment methods, including bank transfer, cheque, and PayPal. We also accept most major credit and debit cards, such as Visa, Mastercard, and American Express. We accept payments in most major global currencies, but we recommend using US Dollars (USD), British Pounds (GBP), or Euros (EUR). Using other currencies may incur additional fees. All transactions are securely processed by HSBC and HSBC Merchant Services.

3.How much parts do you currently have in stock?

We have a vast inventory of new, refurbished, and used automation components, including products from well-known manufacturers such as ABB and Schneider Electric. If you can't find the part you need, don't worry. We work closely with professional suppliers worldwide, and even if the part you need isn't listed on our website, we can provide you with a tailored quote.

4.Who should I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.

Your email address will not be published. Required fields are marked *

Your rating*

Name*

Email*

Code*

Your review*

Save my name,email,and website in this browser for the next time｜comment.

Previous article Next article